High strength and toughness aluminum alloy
Alisi10mnmg is an aluminum alloy brand of European Union, also known as en AC-43500, originated from Germany Silafont-36 of Ryan aluminum. The Si content of the alloy is slightly lower than that of AISI eutectic alloy, It has good liquidity. When the content of Fe is less than 0.15%, the plate shape of alfesi phase can be eliminated, and the microstructure of alfesi phase can be improved. There is no crack in die casting under stress. A certain Mn content can also prevent die sticking of the alloy during die casting. The microstructure is spherical. Therefore, the aluminum alloy is a kind of high strength and toughness aluminum alloy. High-pressure die casting (HPDC) aluminum components are increasingly integrated into the assembly of vehicles, telecom equipment and other industries that need high-Quality structural parts.
| Nickname | AlSi10MnMg |
| The equivalents alloy | AC-43500 |
| Abbreviation of ADC | Aluminum die castings(HPDC) |
| Process | Cold Chamber Die Casting |
| Melting Point | 670 °C ± 50 ℃ |
| Density of ADC12(A383) | 2.75g/cm^3 |
| Yield Strength | 133.4 MPa |
| Tensile Strength | 304.0 MPa |
| Elongation | 12.12% |
Are the AlSi10MnMg aluminum alloy die casting materiel right for you ?
Die casting AISi10MgMn alloy, which possess good casting ability, belongs to Al-Si-Mg- Mn. This kind of aluminum allly could be applied more and more broadly to load structure parts or safety parts with thin walls or complex geometry. But the price is very high than normal material ADC12,A380, etc.
Here are few tips for selecting the most suitable aluminum die casting meterial for your design.
| Alloy Name | Benefits |
| AlSi10MnMg | High strength and toughmess aluminum,excellent mechanical properies. |
Anodizing die cating aluminum | Exterior part with high quality anodized surface treatment. |
| LM6/ADC1/A360 | High corrosion resistance and strength with little element "CU". but more difficult to cast parts. |
| AC44300 | Excellent thermal conductivity casting material. |
| ADC12(A383) | Aluminum alloy ADC12 (A383) offers improved resistance to hot cracking (strength at elevated temperatures) and die filling characteristics. The aluminum properteis is very excellent. It is ease to cast parts with ADC12, good mechanical properties, and dimensional stability, better corrosion resistance. the performance – to – price ratio is very high. |
The applications of die casting aluminium alloy
The uses of this alloy include electronic and Telecome equipment, automotive components, engine brackets, transmission and gear cases, appliances, lawn mower housings, furniture components, hand and power tools, Electric-car , Automobiles, Motorcycles,LED light,Electronics,Communications,die cast,Led Display Cabinet diecast, Home appliance, ,Aerospace, Carpentry, Defense, Bicycles, Digital technology, Carpentry, Pneumatic tools, Valves, Agricultural machinery.
Chemical Composition of Die Casting Aluminum Alloy,
Such as AlSi10MnMg, ADC12(A383), ADC1, ADC10, Zl102, A360, A380, etc.
| Chemical Composition (%) |
| Si | Cu | Mg | Fe | Mn | Zn | Ni | Sn | Cr | Other | AL |
| AlSi10MnMg | 8.5-10.5 | <0.05 | 0.17-0.9 | 0.2-0.3 | 0.2-0.5 | - | - | - | 0.1-0.2 | 0.02 | Balance |
| ADC12 | 9.6-12 | 1.5-3.5 | 0.3 | 1.3 | 0.5 | 1 | 0.5 | 0.2 | - | 0.5 | Balance |
| A360 | 9-10 | 0.6 | 0.4-0.6 | 1.3 | 0.35 | 0.5 | 0.5 | 0.15 | - | 0.25 | Balance |
| A380 | 7.5-9.5 | 3.0-4.0 | 0.3 | 1.3 | 0.5 | 3 | 0.5 | - | - | 0.5 | Balance |
